Diesel generators are used to provide power in emergency situations, such as after a hurricane or other natural disaster. The following tips will help you maintain your diesel generator and keep it running strong.
The first step in maintaining your diesel generator is to check the oil level. If you already have a full tank, there’s no need to add more oil. But if your diesel generator is low on oil, it’s time to add some. If you’re noticing engine trouble or difficulty starting your machine, this is an indication that the oil needs to be topped up.
The next step is to perform a thorough inspection of all components on the generator. This includes checking for loose wiring and bolts that are not secure in place. If any part looks damaged or loose, replace it immediately with a new one from the manufacturer’s list of recommended parts for the model number of your generator.
Use quality fuel. Make sure that you use a quality fuel for your diesel generator, as this will increase its lifespan and performance. The best fuels contain no additives or fillers, which can clog up the engine and cause it to run poorly over time. Some fuels are more corrosive than others and will damage parts of your diesel generator if used improperly. Always use only fuel approved for use with your diesel generator, as well as for the type of engine being used (diesel or gas).
Keep it clean inside and out. Keep the inside of your diesel generator clean at all times by removing any debris that may have accumulated inside during operation; this includes dirt, leaves, twigs and other materials that could have fallen into the unit while working outdoors or being stored indoors over time. Clean out any dust from around the unit’s spark plug area every month or so; this helps prevent fouling of the spark plug by carbon buildup caused by combustion gases.
A dirty fuel system can lead to damage in your engine or other components of your diesel generator. This can lead to reduced performance and even failure over time. To keep this from happening, make sure that everything is cleaned out regularly and that any debris is removed from the system.
You should also check all cables and hoses for signs of wear and tear. Many times these parts will fray over time due to age or excessive heat exposure. You can easily fix these problems by replacing them with new ones from the manufacturer’s list of recommended parts for your model number of generator. More tips found here.